Hainan Bojun Trading Co., Ltd.
Keep Moving,Casting Quality
Add to Cart
GM-20 glue machine
Structural features
★After the surface of cots is adjusted and tempered, the inner hole is processed, the dynamic balance surface is polished and there are 32 lines of concave net pattern, the glue is uniform and the amount of glue consumption is less.
★The rotation of the cots is controlled by the variable frequency motor and frequency conversion, and the frequency control ensures that the linear speed of the cots is synchronized with the two sides, and it can operate independently.
★Coating electric adjustment glue amount of digital display. Automatic circulation of glue, can effectively control the amount of glue, avoid glue precipitation, ensure good glue and save glue.
★All roller surfaces are ground after hard chromium plating.
★ The speed signal of double-sided machine is measured to realize synchronous operation with it. The rubber coating machine is displayed with man-machine interface, which can be used for data setting and easy to operate.
★Electrical design, construction production process, follow the national standards, low failure rate, easy maintenance.
Technical parameters
| Effective width | 1800mm |
| Operation direction | left or right(determined in accordance with customer plant) |
| Design speed | 100m/min |
| Gas supply system | 0.4—0.6Mpa |
| Preheat cylinder temperature range | 150—200℃ |
| Steam pressure | 0.8—1.2Mpa |
Roller diameter parameters
| Glue roller diameter | ￠269mm |
| Doctor roller diameter | ￠142mm |
| Over the paper roll diameter | ￠110mm |
Powered motor parameters
| Glue roller initiative frequency motor | 3KW |
| Sizing Reducer | 250W |
| Pressure roller clearance adjustment motor | 250W |
| Glue pump motor | 2.2KW |
