ISO Cassette Type Single Facer Corrugated Machine 1800mm Width

CASEETTE TYPE SINGLE FACER

※ STRUCTURAL FEATURE:

★ the main flute roller:￠360mm(according to flute differences), pressure roller￠415mm, preheat roller￠400mm.

★ using negative pressure type design, low heat loss, helps the core paper to press evenly and close to the surface of the corrugated roller, makes the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.

★ quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading, the entire group of corrugating with motor drive, put into the machine, fixed to the machine base, only need buttons can complete the replacement quickly and easily.

★ corrugated roll adopts 48CrMo high-quality alloy steel, dealing with heating, after grinding hard chrome plating surface treatment.

★ corrugated roll and pressure roll adopts the airbag control system with high stability, at the same time with pneumatic control buffer effect.

★ Glue volume control with electric adjustment, rubber septum electric device,the glue system can operate independently when the motor stops, prevent glue exhausted.

★ the moveable type glue unit is convenient to clean and maintain.

★ the easy operation control system, touch screen operation interface, drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine is fully functional, easy to operate, and user-friendly.

★ built-in pre-conditioner with proportional spraying device, adjustment of the core paper temperature and moisture.

★ main, vice corrugating, and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly.

※ TECHNICAL PARAMETERS:

1, effective width:1800mm

2, operate direction: left or right(Determined in accordance with the customer's facility)

3, design speed:200m/min

4, range of temperature:160—200℃

5, air source:0.4—0.9Mpa

6, steam pressure:0.8—1.3Mpa

7, equipment: Lmx3.5*Wmx1.7*Hmx2.2

※ ROLLER DIAMETER PARAMETERS:

1, corrugated roller:up￠360mm

down￠356mm

pressure roller:￠415mm

2 , glue roller:￠269mm

fixed paste roller: ￠153mm

preheat roller:￠400mm

※ POWERED MOTOR PARAMETERS:

• main frequency drive motor:22KW rated voltage:380V 50Hz Continuous (S1) working standard
• suction motor:11KW rated voltage:380V 50Hz Continuous (S1) working standard
• glue reducer:100W rated voltage:380V 50Hz Continuous (S2) working standard
• glue gap motor:250W rated voltage:380V 50Hz short(S2) working standard
• glue pump motor:2.2KW rated voltage:380V 50Hz Continuous (S1)working standard